EURO POLYMERS UREA-900

Place of Origin:

Turkey

Brand Name:

EUROPAINT

Usage:

High-grade Polyurea waterproof membrane

Min. Order:

Contact for details

Delivery time:

Contact for details

Main market:

Vietnam, International

Contact infomation

Contact name: Ms. Thao (Eng/Vie)

Mobiphone:(+84) 965 946 943

Email: info@europaintvietnam.vn

Product & service detail

EURO POLYMERS UREA-900

UREA-900 is a premium featuring super durable liquid, cold applied, 2 component, fast curing, very good adhesion and excellent tear resistance for surface requires waterproofing with high durability, UV resistant such as exposed roofs landscapes, planter boxes, etc. abrasion and chemical resistant for outdoor structures.

➦ Application range:

• Use as a high-grade waterproofing for landscapes, planter boxes. podiums, balconies

• Exposed waterproofing for roofs terraces, balconies, etc

• Areas requiring high abrasion protection, contact with wheels such as helicopter pads, parking lots. industrial sidewalks, etc.

• Waterproofing for water tanks. swimming pools, artificial seas. trenches, drainage systems, in amusement parks or industrial factories

• As a protective coating for sewers, wastewater tanks of industrial wastewater treatment plants

• As a protective coating to the PU Foam insulation

• If using for outdoor, apply additional UV protection coating UP-266 Top Coat at the rate of 0.25-0.30 kg /m2 /2 coats.

➦ Feature

• Simple application by manual methods such as paint brush, roller or cold spray, without heating

• Form a seamless and continuously membrane

• Fast curing, shorten application time, improve economic efficiency and minimize risks caused by weather, compared to other waterproof systems.

• Excellent chemical resistance to seawater, wastewater containing salts, oils, fats, alkalis, diluted acids ...

• No solvent, environment friendly

• Good adhesion to most type of substrates such as: Concrete. screed. metal ...

➦ Priming

• Use Euro Polymers UP-100 Primer (dried substrate) or EP-2WT (damped substrate), leave it dry for 1-4 hours (not exceed 8 hours) prior application of UREA-900

➦ Mixing

• Stir well part A using paint mixer, slowly add part B and continuously mixing in 3-5 mins until a homogenous mixture achieved

➦ Application

• UREA-900 can be applied by brush, roller, steel and notch trowel or air pressure spray.

• Leave the 1st applied coat 3-4 hours (not exceed 6 hours), then apply 2nd coat. At least 2 coats are required.

* Fine particles on the surface may occur when applying the UREA-900 product at high temperature and low humidity in the air. However, it does not affect the quality of the product

* For protective molar requirements: apply clean and dry quartz sand to roughen while the final layer of UREA-900 is still wet.

➦ Consumption

• 0.60-0.75 kg/m2/coat (do not apply >0.80 kg/m2/coat). At least 2 coats are required with total 1.20-1.50 kg/m2.

• For root, abrasion or chemical resistant purpose, apply with a minimum of 2.0 kg/m2

➦ Specification

With the goal of becoming a reputable waterproofing solution supplier in the Vietnamese market, Euro Paint Vietnam is constantly improving in terms of management and technical improvement to provide high quality product lines to meet the requirements of domestic and international markets.