Special Primer / oil and vapour barrier Epoxy

ASODUR-SG2 EPOXY PRIMER

1. Description

- 2 component, low solvent epoxy resin.

- Moisture tolerant and impermeable to water vapour.

- Excellent bond to damp concrete substrates.

- Due to its high density, it displaces water from the surface zone and acts as a barrier against capillary rising oil.

- For producing capillary breaking joints in swimming pools.

- For priming oil contaminated, previously cleaned concrete surfaces.

- As a rigid, retrospectively applied waterproofing coat for matt damp cementitious substrates subjected to negative water pressure.

- For horizontal surfaces.

- Certified radon barrier.

- High Sd value, vapourproof to DIN EN 1504.

- Can be used in steam saunas.

- Consumption: Dependent on the substrate approx. 600 - 1,000 g/m²

2, Specifications

- Basic: epoxy glue includes 2 components

- Color: light gray

- Viscosity: 70s in a standard DIN 4mm cup

- Mixing ratio: 100: 12 parts by weight

- Density: 1.86 g / cm3

- Curing time in material: 60 minutes at 23 ° C, 30 minutes at 30 ° C

- Drying temperature (material / substrate): 8 ° C to 30 ° C

- Can travel: after 12 hours at 23 degrees Celsius

- Plastering over: after 12-24 hours at 23 degrees Celsius

- Time for complete drying: after 7 days at 23 degrees Celsius

- Consumption: minimum 600-1,000 g / m2

- Compressive strength: about 80 N / mm2

- Flexural strength: about 30 N / mm2

- WDDW in μ units: about 738,552 (DIN 16 726, air membrane is
exposed)

- Adhesion tensile strength: concrete 1,5

- Clean tools: clean tools immediately after using AQUAFIN-Cleanser

- Packaging: ASODUR-SG2 is available in 2 kg, 5 kg and 15 kg containers. Components A and B are distributed at a predetermined mixing ratio.

- Storage: 24 months when stored in a cool, dry place, above 10 degrees C in the original sealed container.

If you have any inquiries, please contact us through our hotline or send us an e-mail for more details. We are honored to serve you!