Flexibilized thin and medium bed tile adhesive

 SOLOFLEX TILE GLUE

1. Description

- Tested to DIN EN 12004, C2 TE.

- For interior and exterior use.

- Medium bed adhesive up to 10 mm thickness.

- SOLOFLEX is used as a thin-bed adhesive for vitrified tiles, earthenware tiles, ceramic tiles with low water absorption ≤ 0.5% (porcelain), clinker, mosaic and natural stone that is not translucent or prone to discolouration.

- Flexible adhesive in bathroom construction.

- Smooth application.

- Tested with the bonded waterproof membranes SANIFLEX, AQUAFIN-2K/M-PLUS, AQUAFIN-1K-PREMIUM with technical approval.

- Very low emissions - GEV EMICODE EC1 Plus R.

- Fulfills the AgBB scheme requirements.

- The product is a component of the SANIFLEX-EU system in accordance with ETAG 022, part 1.

- Consumption: Approx. 2.3 kg/m² with a 6 mm notched trowel

                      Approx. 3.1 kg/m² with an 8 mm notched trowel

                      Approx. 3.7 kg/m² with a 10 mm notched trowel

2. Specifications

Basic ingredients: Sand / cement, additives (modified polymers)

Color: Gray

Density: Approximately 1.37 g / cm3

Mortar thickness: 2mm to 10mm

Construction surface temperature: + 5oC to + 25oC

Time to be used: about 2 hours

Open time: about 30 minutes

Rub: 24 hours

Travel time on surface: 24 hours

Complete operating conditions: 7 days

Test: DINEN 12004, MPA NRW 220001532-02-01

Consumption: Depends on surface and material 2.3 kg / m2 with 8 mm sawtooth, 3.7 kg / m2 with 10mm sawtooth

Clean: with water immediately after use

Package: 25kg and 6kg bags

Storage: 12 months in dry conditions in original packaging. Use immediately after opening the package

If you have any inquiries, please contact us through our hotline or send us an e-mail for more details. We are honored to serve you!