Fine finish epoxide grout and adhesive

ASODUR-DESIGN

1. Description

- Tested to DIN EN 12004, R2 T.

- Smooth application fine epoxide grout and adhesive with excellent wash-off properties for a fine closed joint finish with an attractive appearance which is robust against cleaners.

- For bonding mosaics and grouting ceramic tiles as well as glass mosaics to concrete, screed, render and old tiled substrates.

- Tested with the bonded waterproof membranes AQUAFIN-RS300, AQUAFIN-2K/M-PLUS with building authorities certificate.

- For joint widths from 1-7 mm.

- Available in 18 colours, additional glitter effect by mixing with gold or silver glitter.

- Very low emissions - GEV EMICODE EC1-R PLUS.

- Fulfills the AgBB scheme requirements.

- Protects against bacterial attack and mould growth.

- The product is a component of the SANIFLEX-EU system in accordance with ETAG 022, part 1.

- Consumption: Adhesive fixing: approx. 1.4 kg/m² and mm thickness

                      Approx. 2.8 kg/m² with a 6 mm notched trowel

                      Approx. 3.8 kg/m² with an 8 mm notched trowel

                      Approx. 4.7 kg/m² with a 10 mm notched

2. Specifications

- Basic: Epoxy resin is filled

- Colors: White, silver gray, medium gray, concrete gray, stone gray, black, chestnut brown, chocolate brown, green brown, caramel, beige, curry, blue, blue, mint, opal blue, ruby ​​red, rose

- Viscosity: viscosity can be plastered

- Joint width: from 1 mm to 7 mm

- Thickness of adhesive layer: from 1 mm to 5 mm

- Density: approx. 1.4 g / cm3 at + 23 ° C

- Mixing ratio: 100: 11 parts by weight

- Storage time: about 40 minutes at + 23 ° C

- Rinse: after about 15 minutes, however within 60 minutes at + 23 ° C

- Minimum curing temperature: + 10 ° C

- Substrate and construction temperature: from + 10 ° C to + 30 ° C, optimal from + 15 ° C to + 25 ° C

- Bug circulation: after about 16 hours at + 23 ° C

- Light circulation / Put into use: after about 48 hours / 7 days at + 23 ° C

- Adhesion tensile strength: concrete incidents

- Cleaning tools: All tools should be cleaned thoroughly with water with detergent added when taking breaks during construction.

- Packing: Plastic containers from 6 to 12 kg with plastic bottles inside (hardening component). Both parts are provided
 according to predefined mixing ratio

- Storage: Minimum 12 months when stored in a cool and dry place above + 10 ° C in original sealed container. Avoid drect sunlight and cold condition

- Material consumption: Binder: about 1.4kg / m2 and thickness in mm

If you have ant inquiries, please contact us through our hotline or send us an e-mail for further information. We are honored to serve you!