Rubber RSS3

RUBBER RSS3

1. Product introduction:

- Smoked sheet rubber is clean, do not carry defects such as air bubbles that can be seen by eyes.

- An important factor in processing high quality RSS rubber is to ensure the level of purity.

- It is necessary to provide enough clean water to dilute latex and to wash while creating rubber sheets.

- Latex is collected as soon as possible to avoid the formation of early latex and also the common antifreeze is sodium sulfite (Na2SO3).

- The dosage may depends on the condition but does not exceed 0.05% for dry rubber.

- When returning to the factory, latex must be taken samples to check DRC materials, there are many testing methods, but now the popular method is TSC using the table to convert into DRC.

2. Classification of smoked sheets is done by bonded method:

- RSS1: No foam, no dust, no stains.

- RSS2: Low foam content, no dust, no stains.

- RSS type 3,4,5: High foam content, no dust, no stains.

3. Application:

- With specific processing conditions and methods, RSS rubber is widely used in techniques such as automobile tires.

- RSS with very high tensile strength, less oxidation, which are suitable for products that require high tear resistance, wear resistance, as well as high offerings.

For further information please feel free to contact Phuoc Thanh Rubber Joint Stock Company!