Color Flex waterproofing agent

COLOR FLEX WATERPROOFING AGENT

1. Product specification:

- Ingredients: Modified Acrylic plastic, fillers, water.

- Additives: Active ingredients against ZPT, Silane root

- Characteristics: Waterproof, anti-moss, protects concrete and cement, increases adhesion

- Solids content: > 55.0 (% mass)

- Density: 1.3 ± 0.02 (g/ml)

- Tools: Roller, brush or spray gun

2. Using instruction:

- Prepare the surface:

+ Remove dust and sand which causes a decrease in adhesion.

+ If the surface is old, clean the moss, old paint, grease and oxidized parts.

+ Fill the cracks before construction.

- Prepare the mix:

+ Mix in proportion: 1Kg of cement + 1 Kg of G9 + 0.5 liters of clean water.

+ Mix the cement with the water first, stir the lump thoroughly before adding the waterproofing agent to mix well.

- Waterproofing agents must be constructed from 2 to 3 finishing coatings, each layer is 2-3 hours apart.

- Once the G9 is mixed with cement, it must be used up within 2 hours, after that time the waterproofing effect will be reduced so it should be mixed sufficiently.

For all relevant details, please contact our company as soon as possible in order to receive many incentives!